Sculpture Studio

Jim and Alexis Pugh Sculpture Studio

The 1,233 square foot Sculpture Studio gives artists-in-residence the space and equipment required to undertake ambitious projects. The space is the only concrete studio in the complex, which is symbolic of the enduring materials used by sculptors. The roof is designed with a long overhang that shelters an outdoor work patio. With its three roll-up doors opened, the space flows easily from interior to exterior. Large glass windows and louvers maximize working light, while wind scoops provide ventilation for an active studio. There are many tools in this studio for working with wood, metal, and many other materials. Other specialized tools can also be requested during ACA Residencies. 

Power Tools:

• 1) Drill Press
• 2) Radial Arm Saws
• 1) 12" Belt Drive Band Saw
• 1) 3" Belt Sander
• 1) 7.25" Circular Saw
• 1) 10" Table Saw
• 1) Jig Saw
• 1) Makita Cordless Drill w/ 2 batteries

Ceramic Equipment:

• 1) Olympic Electric Kiln, oval shaped, max. temp. 2300, cone 8

Misc. Equipment

• 1) Anvil
• 1) Bench Vice
• 1) 24" Framing Square
• 1) 12" Framing Square
• 1) 6" Pocket Rule
• 1) 12ft Tape measure
• 1) Angle Gauge
• 1) 6" Contour Temp. Gauge
• 1) Sharpening Stone
• 1) 12" Crow Bar
• 1) Rubber Mallet
• 1) 12" Hack Saw
• 1) 6" Coping Saw
• 1) Glue Gun
• 1) 10" Crescent Wrench
• 6" Crescent Wrench
• 1) Vice Grips
• 1) Channel Locks
• 1) Wire Cutters
• 3/8" - 1" Paddle bits
• 2) Nail Setters
• 1) Four Sided File
• 2) 4" C-Clamps
• 1) Husky 38 Piece Socket Set
• 4) 2" C-Clamps
• Assorted Screw Drivers
• 1) Rubber Sanding Block
• 1) Caulking Gun
• 1) Line Level
• 1) Staple Gun
• 1) 6' Ladder
• Miscellaneous Straight Edges